The Ultimate Guide to Ping Pong Table Dimensions

Last update:
This post contains affiliate links, and we will be compensated if you buy after clicking on our links.
Standard ping pong table dimensions

Ping pong (or table tennis) is an entertainment sport that originated from the UK for the nobles.

Gradually, this sport became more and more popular around the world.

Knowledge about this sport is extremely rich, ranging from rules, instruments, equipment, and table size is no exception.

If you are wondering about Ping Pong Table Dimensions, we will give you the answer right away.

Ping Pong Table Dimensions

To understand the size of a table tennis table, here are the criteria you need to consider.

If you have the answer to all of these questions, then you are good to go.

What are The Measurements of A Table Tennis Table?

The dimensions of a ping pong table in inches is in line with the standards of the world table tennis federation – ITTF. 

The ping pong table’s regulation size is a rectangle with 108 inches, a width of 60 inches.

Since the measuring unit is in feet, there is a slight difference when converted to inches. 

Many people can round up the size, so it is about 110 inches in length and 60 inches in width.

The size specified in feet is length 9 feet, width 5 feet. 

Meanwhile, the ping pong table height is 30 inches, equating to about 2.5 feet or 76 centimeters.

The answer to “how high is a ping pong table” is calculated by measuring from the floor to tabletop in a perpendicular direction.

If the bench or the measuring instruments are tilted, the height will be slightly changed.


Standard ping pong table dimensions

What is The Measurement of The Ping Pong Table Net? 

The table tennis table will be divided into two equal parts by a vertical net parallel to the end of the table and stretch throughout the entire area divided by two sides of the table. Each grid side will correspond to a team. 

Table tennis mesh material is usually synthetic fiber or polyester.

Mesh size is only 6 inches high (approximately 15.2cm) from the tabletop and 29 inches ( estimated 76cm) height from the ground. 

The mesh protruding from the table is slightly more than 6 inches, which is about 15.25 cm.

However, this size can vary depending on different types of mesh.

Mesh pile helps to fix the net to the ball table thanks to clamps and fixing screws.

The mesh pile is often made of metal, anti-rust paint on the outside.

When purchasing nets, there may or may not be a net pile attachment with the product.

The height of the pile is usually equal to the height calculated from the mesh’s table surface.

What are The Ping Pong Table Specs?

In addition, regular table tennis tables are made from plywood material and MDF.

Plywood imported from Russia is laminated to form a block, so its durability is not as good as MDF, which requires a careful preservation process to last for a long time. 

The tabletop is covered with a special anti-stain paint of dark green or watermelon green.

Around the table surface, there is a white line 2cm wide. Each line along the length of 274cm is called the vertical border.

Meanwhile, the bar along the table’s width is called the horizontal border (the end of the table). 

For a docking table, the slight difference is that there is an additional vertical cut-off limit line for the table’s length.

This table dividing line is 3mm wide and is straightened parallel to both sides of the table.

However, even if made of any kind, a ping pong table must ensure a bounce of 23 cm when you drop the ball freely from a height of 30 cm.

Some table tennis tables also have wheeled table legs for easy movement or split into two pieces.

How Much Space Needed for Ping Pong Table? 

The space for table tennis must be spacious enough for athletes to move freely.

The area required by international regulations must be 46ft (14m) or greater by the length of the yard, the width is about 23ft (7m), the height must be at least 16ft (5m).

The wall of the room must be at least 3m high and painted in dark color.

It would also be best if you cover the floor with white to facilitate the player’s eyes, and there should not be glasses or furniture with reflections.

Usually, in table tennis clubs, the tables will be placed adjacent to each other and from 5.5m to 6m apart.

The separators between tables must be up to 75cm high in soft material to avoid players’ injuries from being touched.

In addition to the spacious space, it is necessary to ensure the light and temperature factors to provide the best game.

The ping pong room lights must be at least 5m high, and the light intensity must reach 500 to 800 lux. 

You should not let the lowest temperature below 15 degrees C.

If the temperature is lower than this level, your health will be affected quite a lot; you will get tired faster and more likely to get sick.

Mid-Sized Ping Pong Tables

In addition to the ping pong table Olympic size, there are more table types you can choose from.

If you have children and want your kids to be exposed to table tennis early, a midsize table tennis table is not a bad choice at all.

It is usually made of wood and then painted dark green.

A medium-sized table tennis table will be 3/4 of the standard size of a ping pong table.

The overall dimensions of length x width x height correspond to 6 x 3 x 2.5 (ft).   

In Conclusion

We hope that after reading this article, you now understand Ping Pong Table Dimensions.

Knowing the exact size of ping-pong tables will help you find the right tables and calculate the space to place them.

Thank you for reading, and don’t hesitate to share this with your family and friends.

Further reading:

5/5 - (1 vote)